DO'S FOR SAFETY

 

  • CHANGE DEFECTIVE ELECTRIC APPLIANCES /SWITCHES IMMEDIATELY

  • ALWAYS USE ISI MARK ELECTRIC APPLIANCES / SWITCHES / WIRING MATERIALS

  • REPLACE LOOSELY HELD SWITCHES BY FIRM ONES

  • CARRY OUT INTERNAL WIRING AS PER ENGINEERS ADVICES

  • ATTEND LOOSE CONTACTS IN TERMINALS AND INTERNAL WIRINGS IMMEDIATELY TO AVOID ELECTRICAL AND FIRING HAZARDS

  • HANDLE WITH CARE ELECTRICAL EQUIPMENTS

  • HANDLE ELECTRICAL EQUIPMENTS ON DRY SURFACE/ INSULATING PAD

  • PERIODICALLY CHECK THE ELECTRICAL APPLIANCES / WIRINGS SYSTEMS /SWITCHES FOR AVOIDING ANY FAULTS

  • SAVE ELECTRICITY

 

DON'T FOR SAFETY

 

  • DONíT USE SUBSTANDARD ELECTRIC APPLIANCES / SWITCHES / WIRING MATERIALS

  • DONíT USE LOOSELY HELD SWITCHES IN WIRING SYSTEM

  • DONíT USE MORE INCANDESCENT LAMP

  • DONíT CARRY OUT INTERNAL WIRING WITHOUT SUPERVISION AND ADVICE OF  AN ELECTRICAL ENGINEER.

  • DONíT ALLOW LOOSE  CONTACTS OF TERMINALS AND WIRES IT MAY LEAD TO ELECTRICAL AND FIRE HAZARD.

  • DONíT VENTURE IDENTIFYING ELECTRICAL SUPPLY  WITHOUT PROPER CURRENT TESTER.

  • DONíT USE HIGH WATTAGE LAMPS FOR STAIR CASE, TOILET AND LOBBY'S ETC

  • DONíT USE TWO PIN SOCKETS

  • DONíT ALLOW CHILDREN'S TO TOUCH ELECTRICAL APPLIANCES

  • DONíT OVERLOAD INTERNAL WIRINGS WHICH MAY CAUSE VOLTAGE DROP

  • DON'T WASTE ELECTRICITY.

TOP